Category: 5G Network Planning
5G NR Modulation and Coding Scheme – Modulation and Code Rate
For any communication technology, Modulation and Coding Scheme (MCS) defines the numbers of useful bits which can carried by one symbol. In contrast with 5G or 4G, a symbol is […]
5G NR RSRP Measurement Report Mapping
In 5G NR, RSRP measurement is performed and reported at Layer 1 (Physical Layer) and Layer 3 (RRC Layer). For example, 5G capable device can provide SS-RSRP measurements at Layer […]
5G NR System Information Type#3 – SIB 3
In 5G NR, SIB3 contains neighboring cell related information relevant for intra-frequency cell re-selections only. It includes cells with specific re-selection parameters and blacklisted cells information. Characteristics of NR System […]
5G NR RRC Timers, Counters and Constants
5G NR radio resource control (RRC) has introduced following listed timers, counters and constant for reliable functioning of procedures like RRCsetuprequest, RRCreestablishment, RRCresume, RRCsuspend etc. RRC timer indicates the timer […]
5G NR RRM Measurement Requirements
In 5G NR, the Sync Signal/PBCH block (SSB) burst is consists of multiple SSBs. These multiple SSBs are associated with the different SSB indexes and with the different transmission beams […]
5G NR Measurement Events
In any telecom technology (2G, 3G, 4G or 5G), mobility (handover) decision whether mobile device will be handover or not is taken by by base station based on measurement reports […]
5G mmWave 28 GHz Band Link Budget – n257
The combination of 5G NR technology and millimeter wave bands pioneer a new level of mobile performance with ultra-high speeds and low latencies. Momentum behind 28 GHz is growing, with […]
5G NR Inactive-RNTI (I-RNTI) for RRC_INACTIVE State
In 5G NR, 3GPP specification has introduced an RRC state as RRC_INACTIVE state. The aim of RRC_INACTIVE state is to achieve power saving with acceptable access latency, and is suitable […]
5G NR Network Relationship – Neighbor Planning
In any telecommunication technology starting from 2G to 5G, Neighbor relation or to say Neighbor planning is an important activity. Neighbor relation information is very critical for cell re-selection while […]
5G Network RF Planning – Link Budget Basics
The link budget is the calculation of total gain and loss in the system to conclude the received signal level (RxSL) at the receiver (UE). The received signal level is […]