Skip to content
Techplayon
Partner Community
  • Home
  • 5GNR
  • LTE
  • RF Design
  • IoT
  • DevOpsTest
  • Telco Cloud
  • O-RAN
  • Contributors

Category: Radio Resource Management

E2SM RC – E2 Service Model RAN Control Procedure

Introduction In our other post Open RAN E2 Interface , we discussed that E2 is the interface between the Near RT RIC and Open RAN CU/DUs. This interface uses following […]

September 30, 2022October 8, 2022 Author 5G Call Flow, Open RAN, Radio Resource Management, Wireless Testing

5G NR Resource Allocation – Resource Allocation Type 0

Introduction To transmit and recieved data in downlink and uplink UEs need bandwidth resource allocated and this allocation provided by gNB. In 5G NR, similar to 4G the resource allocation […]

November 21, 2021November 28, 2021 Author 5G, 5G Physical Layer, New Radio, Radio Resource Management, RRC Signalling, Tech Fundas, Wireless Testing

5G NR Measurement Configuration: Meas Object, Report Config, Meas ID

During UE attach, after a radio bearer is set up, the eNB (in NSA Mode)  or gNB (in SA Mode) delivers measurement configurations to the UE based on the mobility […]

August 12, 2020June 27, 2021 Author 5G, Radio Resource Management, RRC Signalling

5G NR RSRP Measurement Report Mapping

In 5G NR, RSRP measurement is performed and reported at Layer 1 (Physical Layer) and Layer 3 (RRC Layer). For example,  5G capable device can provide SS-RSRP measurements at Layer […]

June 3, 2020June 3, 2020 Author 5G, 5G Network Architectures, 5G Network Planning, 5G Physical Layer, Call Flow, LTE, New Radio, Radio Resource Management, RF Basics, RRC, RRC Signalling, Tech Fundas

5G NR RRC Timers, Counters and Constants

5G NR radio resource control (RRC) has introduced following listed timers, counters and constant for reliable functioning of procedures like RRCsetuprequest, RRCreestablishment, RRCresume, RRCsuspend etc. RRC timer indicates the timer […]

March 22, 2020July 21, 2020 Author 5G, 5G Network Architectures, 5G Network Planning, Future Network Optimization, New Radio, NR, Radio Resource Management, RRC, RRC Signalling, Signaling

5G NR RRM Measurement Requirements

In 5G NR, the Sync Signal/PBCH block (SSB) burst is consists of multiple SSBs. These multiple SSBs are associated with the different SSB indexes and with the different transmission beams […]

March 17, 2020July 21, 2020 Author 5G, 5G Network Architectures, 5G Network Planning, Radio Resource Management, Signaling
Follow us on linkedIn
Proudly powered by WordPress | Theme: NewsAnchor by aThemes.