Skip to content
Techplayon
Partner Community
  • Home
  • 5GNR
  • LTE
  • RF Design
  • IoT
  • DevOpsTest
  • Telco Cloud
  • O-RAN
  • Contributors

Tag: 4G

4G LTE Important QXDM Log Packets

QXDM is most widely used tool in wireless 4G,5G technology to capture Qualcomm based Mobile signalling and data details logs for debugging purpose. Whether it is Field testing or Lab […]

August 29, 2020August 29, 2020 Author RRC Signalling, Signaling, TDD LTE, Wireless Testing

Robust Header Compression – ROHC

ROHC is a header compression protocol/algorithm that can be used compress the header of different IP packets. In normal case without compression  IPv4 header is 40 bytes and IPv6 header […]

May 19, 2019July 21, 2020 Author 5G, Interviews, LTE, Tech Fundas, Voice Services, VoLTE

PLMN Selection in LTE (Idle Mode Action)

UEs can be either in RRC_CONNECTED or RRC_IDLE mode. UEs will be declared as RRC_IDLE if there is no RRC connection between the UEs and the eNodeB and RRC_Connected when […]

April 25, 2019July 21, 2020 Author Future Network Optimization, Interviews, LTE, RF Basics, Tech Fundas

Multi Carrier Cell Re-selection in LTE

Cell Re selection is a procedure used to change the cell after the UE is camped on a cell and stays in the Idle mode.This procedure is used to let […]

March 10, 2019July 21, 2020 Author Future Network Optimization, Interviews, LTE, RF Optimisation, TDD LTE, Tech Fundas

eMBMS Devices List, Model, Chipset and Middleware Details

Global Mobile Supplier Association (GSA) has provided a list of LTE devices which is capable to support eMBMS feature. The eMBMS device are not some special device, these are similar […]

November 16, 2018November 16, 2018 Author Future Network Optimization, Interviews, LTE, Tech Fundas

NB-IOT – Physical Broadcast Channel (NPBCH)

NPBCH stands for narrow band physical broadcast channel similar to PBCH in LTE Technology. The NPBCH is used to deliver the NB-IoT Master Information Block (MIB), which provides essential information […]

October 5, 2018July 23, 2020 Author LTE, Narrow Band IoT, RF Basics

NB-IoT Frequency Bands (As per 3GPP Rel. 13, 14 and 15)

3GPP has defined a set of frequency bands for which NB-IoT can be used. 3GPP TS 36.101  from Release 13 provides the list of the supported bands: 1, 2, 3, 5, […]

August 20, 2018July 23, 2020 Author 5G, Interviews, IoT, LTE, Narrow Band IoT, SmartCities, Tech Fundas

LTE eNodeB Scheduler and Different Scheduler Type

What is a LTE Scheduler ? Scheduling is a process through which eNodeB decides which UEs should be given resources (RBs), how much resource (RBs) should be given to send […]

August 3, 2018July 21, 2020 Author Interviews, LTE, Tech Fundas, Voice Services, VoLTE

Feature Group Indicators (FGI bits) in LTE – Rel. 8, Rel. 9 and Rel. 10

Feature Group Indicators (FGI bits) Feature Group Indicator (FGI) is a special Information Element (IE) within UE Capability Information message. The parameters other than FGI in UE Capability Information message […]

January 18, 2018July 21, 2020 Author Future Network Optimization, LTE, TDD LTE, Tech Fundas, Voice Services, VoLTE

5G NR and 4G LTE Comparison

A Short comparison of 5G and 4G technologies is given is table below Technology Data Rates Latency Mobility Support Spectrum Efficiency Users Density Energy Efficiency 5G (NR) Avg 100 Mb/s […]

May 30, 2017July 21, 2020 Author 5G, Interviews, LTE, Narrow Band IoT, New Radio, NR, RF Basics, TDD LTE

Posts navigation

Older posts
Follow us on linkedIn
Proudly powered by WordPress | Theme: NewsAnchor by aThemes.