KPI Requirements for Next Generation Access Technologies
A fully mobile and connected society is expected in the near future, which will be characterized by a tremendous amount...
Category: LTE
Narrow Band (NB) -IoT Modem Chip Vendors
There are a number of wireless technologies available for the Internet of things. These are mainly divided into two categories:...
5G Absolute Radio Frequency Channel Number (NR-ARFCN)
An Absolute Radio-Frequency Channel Number (ARFCN) is a code that specifies a pair of reference frequencies used for transmission and reception in...
NR-Primary Synchronization Signal (PSS)
5G-NR Primary Synchronization Signal (PSS) is Physical Layer specific signal and help UE to get Radio Frame Boundary. It is...
Explain LTE Frame Structure both for FDD and TDD
Time duration for one frame (One radio frame, One system frame) is 10 ms. This means that we have 100...
What are the important parameters to look for while choosing PCB material ?
[the_ad id=”2778″]In order to design PCBs intelligently it becomes important to understand, among other things, the electrical properties of the...
RIP Telecom Vendors and Operators
In little less than few years, the whole dynamics of the Telecom industry has changed. There have been many contributing...
Explain Radio Requirement Set for 5G NR (1-C, 1-H, 1-O, 2-O BS Types)
The capabilities of 5G NR wireless access must extend far beyond previous generations of mobile communication. Examples of these capabilities...
How Conventional AGC (Automatic Gain Control) works in receiver chain and its important parameters.
In wireless communication systems such as LTE, the received signal has an unpredictable signal power and varies over a wide...
LTE Control Plane and User Plane Latency Calculation (FDD)
LTE- is designed to support peak data rates of 300 Mbps in the downlink and 75 Mbps in the uplink...