5G Radio Network Temporary Identifier | 5G RNTI
5G RNTI 5G RNTI stands for Radio Network Temporary Identifier. RNTIs are used to differentiate/identify a connected UE in the...
Techplayon Blog
CBRS Network Architecture and Spectrum Access System Operation
CBRS Network Architecture: CBRS is known as Citizen broadband radio service, It is a 150 MHz wide broadcast band in ...
5G NR Logical ,Transport and Physical Channels Mapping
Logical Channel Definition : Medium Access Control (MAC) Layer of NR provides services to the Radio Link Control (RLC) Layer...
mSAP: New PCB Technology to be used in 5G Smartphone
The light, small and multi-functional electronic products have led to the development of the printed circuit board on which the...
LoRa – Device Re-activation Call Flow (Rejoin Procedure)
LoRa Technology supports the handling and configuration of rejoin-requests for LoRa End Devices. Using a rejoin-request, a device is able...
LoRa Device Activation Call Flow | LoRA Device Join Procedure
LoRa Device When a new End Device or LoRa Device is added to a LoRa network, it should go through...
LoRa- (Long Range) Network and Protocol Architecture & Frame Structure
LoRa is Long Range ,low data rate, low power wireless platform technology for building IoT network. It uses unlicensed radio spectrum in the...
NB-IOT UE Attach Call Flow Messaging
When a NB-IOT UE accesses a cell, it follows the same principle as for LTE: It first searches a cell...
NB-IOT Synchronization Signals (NPSS and NSSS)
The NPSS and NSSS helps UE to synchronize downlink to an NB-IoT cell. These are transmitted in certain subframes based...
NB-IOT – Physical Broadcast Channel (NPBCH)
NPBCH stands for narrow band physical broadcast channel similar to PBCH in LTE Technology. The NPBCH is used to deliver...