5G NR Throughput Calculation
The DL and UL max 5G throughput data rate supported by the UE is calculated by band combinations and baseband...
Tagged: 5G Access
5G NG Identities (UE and Network Identifiers)
UE Identifiers C-RNTI:This is an unique identification, which is used as an identifier of the RRC Connection and for scheduling...
5G ORAN Network Architecture Elements
ORAN Introduction ORAN network architecture is needed to address the specific needs of different mobile operators around the world and...
3GPP Evolution for MIMO
Released 3GPP standards on MIMO are shown in below image. As you know, Coordinated Multipoint (CoMP) is a type of Cooperative...
5G NR Measurement Configuration: Meas Object, Report Config, Meas ID
During UE attach, after a radio bearer is set up, the eNB (in NSA Mode) or gNB (in SA Mode)...
5G RACH Procedure Overview – CBRA & CFRA
5G RACH Overview When we want to connect a UE to 5G network, it has to synchronize in downlink as...
5G NR – Msg2 Random Access Response (RAR) – SA Mode
In 5G NR, the initial access include down-link synchronisation and up-link synchronisation procedures. Downlink synchronisation can be achieved after decoding...
5G NR RSRP Measurement Report Mapping
In 5G NR, RSRP measurement is performed and reported at Layer 1 (Physical Layer) and Layer 3 (RRC Layer). For...
5G NR RRC Timers, Counters and Constants
5G NR radio resource control (RRC) has introduced following listed timers, counters and constant for reliable functioning of procedures like...
5G NR Inactive-RNTI (I-RNTI) for RRC_INACTIVE State
In 5G NR, 3GPP specification has introduced an RRC state as RRC_INACTIVE state. The aim of RRC_INACTIVE state is to...