5G Carrier Aggregation – Bandwidth Classes
Carrier Aggregation Bandwidth Classes Carrier Aggregation (CA) increases the bandwidth by combining several carriers. Each aggregated carrier is referred to...
Category: 5G Physical Layer
5G NR SINR Measurement and Its Mapping
Introduction SINR is Singal to Interference Noise Ratio is a measure of signal quality. It can be defined as the...
NR pdcch-ConfigSIB1 – ControlResourceSetZero & SearchSpaceZero
In 5G, during initial network access, a UE does a completes a band scan for SSB decodes the PBCH. The...
5G NR Downlink HARQ Codebook
5G Downlink HARQ Codebook In 5G NR, 3GPP specification has defined HARQ Codebook to provide the feedback to base station...
5G SLIV – Start and Length Indicator Value
Introduction In 5G NR, SLIV means Start and Length Indicator Value. It is used for Time domain resource allocation for...
Spectral Efficiency | Bits/Second/Hz | 5G-4G
Spectral Efficiency What do you think of when you hear word “spectral efficiency?” The answer will come, it has to...
Wireless Channel Estimation Using Deep Learning: A Comparison with Least Squares Method
Introduction In a wireless communication system, transmitted signals experience distortion and attenuation as they propagate through the environment. This effect is usually modelled as a linear time-invariant system...
5G NR RSRQ Measurements and Its Mapping
The RSRQ (Referece Signal RecivedQuality) is a measurement performed by the UE to know the Quality of recieved Reference Signals....
5G NR-PDCCH Channel Overview and Processing
5G PDCCH Channel Overview The physical downlink control channel (PDCCH) in NR carries Downlink Control Information (DCI). In this post...
5G NR SS-RSRP Value Measurement Mapping
UE does measurement of SS-RSRP and use it for cell selection, cell reselection, power control, mobility procedures and beam management...