Skip to content
Techplayon
Partner Community
  • Home
  • 5GNR
  • LTE
  • RF Design
  • IoT
  • DevOpsTest
  • Telco Cloud
  • O-RAN
  • Contributors

Category: 5G Call Flow

5G PDU Session and Its Types

Introduction In 5G System, the one of the key task for the networ is to provide the connectivity to UE towards  a Data Network (DN) know as 5G DNN which […]

November 28, 2021November 28, 2021 Author 5G, 5G Call Flow, 5G Core, Call Flow, NAS Signalling, Signaling, Wireless Testing

5G SA Inter gNB Handover – N2 or NGAP Handover

Introduction Mobility (Handover) in an important feature in any telecom generation and so it is in 5G. The basic handover procedure remains same as it was in legacy networks, i.e. UE reports measurement report with […]

October 24, 2021November 28, 2021 Author 5G, 5G Call Flow, 5G NR, RRC Signalling, Signaling, Wireless Testing

5G SA Inter gNB Handover – Xn Handover

Introduction Mobility (Handover) in an important feature in any telecom generation and so it is in 5G. The basic handover procedure remains same as it was in legacy networks, i.e. UE reports measurement report with […]

October 2, 2021January 13, 2023 Author 5G, 5G Call Flow, Call Flow, New Radio, RRC Signalling, Signaling, Wireless Testing

5G NR pdcch-ConfigSIB1 – ControlResourceSetZero & SearchSpaceZero

In 5G, during initial network access, a UE does a completes a band scan for  SSB decodes the PBCH. The PBCH provides sufficient information lo allow the UE to proceed […]

September 18, 2021September 19, 2021 Author 5G, 5G Call Flow, 5G Physical Layer, Call Flow, RRC Signalling, Tech Fundas, Wireless Testing

SSC Modes – Session and Service Continuity in 5G

In any telecom technology one of the key feature requirement is data session and service continuity to enusre the uninterrputed service experience to the users irrespective of any change of […]

September 16, 2021November 28, 2021 Author 3GPP Specification, 5G, 5G Call Flow, 5G Core, NAS Signalling, New Radio, NR, Signaling

5G MAC BSR – Buffer Status Reporting

The Buffer Status reporting (BSR) is a MAC layer procedure which is used by the UE to provide information about the amount of data available for transmission in the UL […]

August 15, 2021August 16, 2021 Author 3GPP Specification, 5G, 5G Call Flow, 5G MAC, 5G MAC Layer, Tech Fundas

5G NR BFR – Beam Failure Recovery

The 5G communication specially at higher frequencies or mmWave is using Massive MIMO with Beamforming. Beamforming is a signal processing technique that allows gNB send targeted beams of data to […]

July 21, 2021July 22, 2021 Author 3GPP Specification, 5G, 5G Call Flow, 5G MAC Layer, 5G Physical Layer

5G NAS – Authentication Failures Cause Values

In 5G Network, Non-access stratum (NAS) layer managed the PLMN specfic Network Failure and Authentication Failures between the 5G UE and 5G Core. Mutual authentication is a mandatory security procedure […]

July 11, 2021July 11, 2021 Author 5G, 5G Call Flow, 5G Core, NAS Signalling, Tech Fundas

5G NAS – Registration Reject Cause

In 5G NR, Registration is a NAS layer or 5G Mobility Management (5GMM) process and it is very much similar to the Attach Process in LTE except some of the […]

July 6, 2021July 11, 2021 Author 5G, 5G Call Flow, NAS Signalling, Tech Fundas

5G NAS – PDU Session Reject Cause Values and Reasons

5G connectivity service is named as PDU Session. A PDU session is very similar to an EPS bearer in LTE, except for the QoS model and the supported user data.  […]

June 27, 2021June 27, 2021 Author 5G, 5G Call Flow, 5G NR, NAS Signalling, Tech Fundas

Posts navigation

Older posts
Newer posts
Follow us on linkedIn
Proudly powered by WordPress | Theme: NewsAnchor by aThemes.