Network Refresh Cycles: What Data Centres and Telecom Operators Should Do With Decommissioned Servers

As data centres expand and telecom operators move to 5G core, edge computing and higher-throughput networking, they’re left with racks of servers that still work but no longer fit the job. Deciding whether to redeploy that hardware or sell it isn’t always simple, especially when you want to recover as much value as possible without putting any data at risk.

Why Network Upgrades Leave Servers Behind

Legacy hardware, which was once able to handle the most strenuous workloads, may no longer have the processing power or network interface required to handle new applications and demands.

However, legacy does not always equate to junk, and in fact many servers that data centres and telcos decommission may still be able to offer quite a bit of useful life. Processors, memory, storage capacity, and networking interfaces that are still good for less intensive workloads, or can be useful elsewhere, can be reused, repurposed or resold.

When to Resell and When to Redeploy

If legacy equipment is able to be used internally for other workloads without compromising on performance or reliability, it may make sense to redeploy your legacy servers in backup data centres, test beds and development environments, or even out at edge data centre locations. This will save you money on buying new hardware and can be a great way to get some additional use out of your hardware investment.

A few questions usually settle it. How much power does the old hardware draw compared with newer servers doing the same work? Older machines can cost more to run than they save. Is it still covered by the manufacturer’s warranty and support, and will it keep getting firmware and security updates? A server that’s out of support is a risk in a production network, even if it runs fine. If the answers point away from reuse but the hardware still has life in it, it often makes more sense to sell servers on the secondary market while they’re still in demand.

Preparing Decommissioned Servers for Resale

When sending hardware off to a new home, the most important thing is to prep it. First and foremost, data security needs to be at the forefront, especially if your hardware was used to host a telecom’s network or stored sensitive company data.

This means that you will want to wipe any data off of your storage media. Depending on the type of storage media you need to wipe and data security requirements, this may require certified data wipe software or even physically destroying your storage media. You’ll want to be able to prove your data was wiped securely, so make sure that you get the proper documentation for your records.

Organisations should also check for stored credentials, encryption keys, certificates, and network configurations that could expose sensitive infrastructure information. Don’t forget the server’s remote management controller, such as Dell’s iDRAC or HPE’s iLO. It keeps its own usernames, passwords and network settings, separate from the drives, so reset it to factory defaults before the server leaves.

Data sanitisation aside, it’s a good idea to inspect and test your data centre hardware before sending it off. This means running tests to check that the processors, memory modules, storage devices, power supplies, and network interfaces are all in good condition, which you can do with any system management software that may be installed, or tools provided by your OEM.

Documenting the model, serial numbers, and specs, as well as any accessories that your legacy equipment may include, will help you be able to determine the value of your equipment, as well as accurately sell it. Cleaning it up and organising any matching components that you may still have can help you when you are ready to sell your servers and help make your hardware more enticing to a buyer.

Why Timing Matters for Server Resale Value

With new generations of servers always coming to market, resale value for data centre hardware depreciates over time, and the latest hardware that still has plenty of commercial value today may be less desirable tomorrow when new processor, memory and networking technologies become widely available.

So if you have servers that still work but no longer fit your needs, start the resale process early. Each month you wait, the hardware is worth a little less. Large network refreshes add another problem: when many operators retire the same generation of equipment at once, the secondary market fills up with similar servers and prices drop. That’s why disposal works best when it’s planned as part of the refresh cycle, not after it.

Making Network Refreshes More Cost-Effective

Decommissioned servers don’t have to be written off. Some can take on lighter work internally, others can be sold while they still have value, and the rest can be recycled responsibly. Making those calls early, with data security handled properly, turns a network refresh from a pure cost into one that pays some of itself back.